Synthetic Macro Fiber Hybrid 54mm for Industrial Floors And Slab

Synthetic Macro Fiber Hybrid fiber is a blend of synthetic microfiber and synthetic macrofiber, speical designed for used as shrinkage and temperature/secondary reinforcement to concrete flooring or slab, as structural reinforcing admixtures. Compliance with ASTM C1116 and EN14889-2:2006

Quantity:
Availability:





Inquire Add to Basket

Model:
ELT-HYBRID
Brand:
ELITE-INDUS

Synthetic Macro Fiber Hybrid 54mm synthetic macro fiber 54mm synthetic macro fiber hybrid Synthetic hybrid MacroFiber Synthetic macrofiber Synthetic macrofibre Synthetic macro fibre synthetic macro fiber synthetic hybrid fiber synthetic hybrid fibre

Products

Product Description

Synthetic Macro Fiber Hybrid 54mm for Industrial Floors And Slab

Synthetic hybrid fiber is a high-performance polyolefin synthetic macrofiber twist, blend of synthetic microfiber together, typical use for a secondary reinforcement to control shrinkge and temperature cracking, and settlement cracking. can be used as replacement of welded-wire reinforcement and reinforcing bars.

features:

1, Uniform distribution throughout the concrete matrix

2, Exceptional finishability

3, Improves green strengths

4, Alkali resistant and rust proof

Description

Synthetic Macro Fiber Hybrid is a 100% virgin blended polymer synthetic macrofiber for Structural reinforcement, used as substitute of steel fibers, wire mesh and reinforcing bars in a wide variety of secondary reinforcement applications. twisted-bundle fiber made of a strong synthetic copolymer, to increase load-transfer and post-crack performance.

Synthetic Macro Fiber Hybrid compliance with ASTM C1116 and EN14889-2 Standard, specifically used for the reduction of plastic shrinkage cracks, to improve impact, shatter and abrasion resistance, to increase fatigue resistance, to increase toughness of concrete and provide long term durability of concrete, structural enhancements and cement based building products.

Functions

· Increases impact, shatter and abrasion resistance of concrete

· Reduces segregation, plastic settlement, and shrinkage cracking of concrete

· Provides three-dimensional reinforcement against macro-cracking

· Increases overall durability, fatigue resistance and flexural toughness

· Reduction of in-place cost versus wire mesh for temperature / shrinkage crack control

· Easily added to concrete mixture at any time prior to placement

Applications

· Industrial and residential flooring

· White toppings, bridge decks and pavements

· Thin walled pre-cast (septic tanks, vaults, walls, etc.)

· Mass concrete

· Slabs on ground

Specification

*Density* *(g/cm 3 )*	0.91 +/- 0.01	*Equivalent Dia. (mm)*	0.3±0.05
*Shape*	Hybrid	*break tensile Ratio* *(%)*	8-15
*Crack Ratio* *(%)*	20+/-5	*Melting point ( C. Deg)*	160-170
*Tensile Strength* *(Mpa)*	450 to 650	*Water Absorption*	No
*Elastic Modulus (*Mpa)	>3500	*Resistance to acid & alkali*	Excellent
*Material*	Virgin Copolymer PP/PE
*Length* *(mm)*	38/48 /54 or as per your request
Dosage rates will vary depending upon the reinforcing requirements and can range from 1kg/m³ to 8kg/m³

Directions for Use

Synthetic Polymer Macro Fiber can be added to concrete mixture at any time prior to placement of the concrete.

Synthetic Polymer Macro Fiber is generally recommended to add any fiber material at the ready-mix concrete plant during batching. Fibers must be mixed with concrete for a minimum of 3-5minutes at maximum mixing speed, depending on the mixer type, to ensure complete dispersion and uniformity.

Packing

*Shape*	*Inner Packing* *(PE* Film Bag)	*Outer Packing* *(Plastic Woven* Bag)	20`gp	40`HQ
Hbrid	1.0kg	10kg	5500kg	13000kg
	*Inner Packing(*Water Soluble Bag)	*Outer Packing (Carton)*
	1.0kg	10kg	4000kg	9500kg
	1.0kg	360ctns/1x20`gp or 900ctns/1x20`gp with pallet
Customized packing is accept