Polypropylene Monofilament Microfibers 12mm for Concrete

Polypropylene Monofilament microfibers is a high-tensile strength, high modulus of elasticity, ultra-thin monofilament polypropylene micro synthetic fiber. This fiber can quickly distribute uniformly throughout the concrete, effectively controlling plastic shrinkage micro-cracking.

Quantity:
Availability:





Inquire Add to Basket

Model:
ELT-MONO
Brand:
ELITE-INDUS

Monofilament Microfibers monofilament microfiber polypropylene micro synthetic fiber Micro Synthetic Fiber polypropylene micro fiber polypropylene microfiber concrete fiber concrete reinforcement fiber polypropylene fiber synthetic microfiber

Products

Product Description

Polypropylene Monofilament Microfibers 12mm for Concrete

Control Plastic Shrinkage Cracking of concrete

Breif introduction:

Polypropylene Monofilament microfibers is a high-tensile strength, high modulus of elasticity, ultra-thin monofilament polypropylene micro synthetic fiber. After mix it into concrete, it will quickly distribute uniformly throughout the concrete, effectively controlling plastic shrinkage cracking of concrete.

so it is a very good concrete cracking prevention additives.

Polypropylene monofilament microfiber is a monofilament polypropylene microfiber use for concrete reinforcement, Quality complies with ASTM C1116 or EN14889-2 Standard.

The recommend dosage rate from 0.6kg/m3 to 3.0kg/m3.

Typical applications of Polypropylene Monofilament microfibers

1, Residential and Commercial slabs-on-ground

2, Controll & Reducing the plastic shrinkage cracking of concrete

3, Superior finishability that makes this synthetic fiber-reinforced concrete a good candidate for all residential applications

4, benefits for producing durable, low-maintenance concrete

Functions of Polypropylene Monofilament microfibers

Resist to shrink & crack	Improve tendons protection
Increase seepage resistance	Replace steel mesh (using in plastering)
Increase friction resistance	Prevent mortar split and crackle expansion
Increase freezing & thawing resistance	Increase impact resistance and peeling resistance

Advantages of Polypropylene Monofilament microfibers

Cost effective	Inhibits intrinsic cracking in concrete
Replaces anti crack mesh reinforcement	Disperses uniformly throughout the mix
Decreases construction time and labor	No rust, Explosive spall control

Specifications of Polypropylene Monofilament microfibers

Raw Material	100% virgin Polypropylene	Crack Elongation	20+/-5%
Fiber Type	Monofilament PPMF12	Fiber Diameter	25-30um
Melting Point (C Deg.)	160 - 170	Density (g/cm3)	0.91+/-0.01
Acid & Alkali Resistance	Strong	Tensile Strength (MPa)	450 min.
Length	12mm	Water absorbency	NO
Normal Length	4mm, 6mm, 8mm, 12mm, 18mm, 24mm, 30mm etc... (times of 4mm or 6mm with 1mm more or less )