Monofilament Pp Polypropylene Fiber for Mortar Plaster Cracking Resistant

pp polypropylene fiber monofilament 6mm for mortar plaster reinforcement, as anti-cracking additives

Quantity:
Availability:





Inquire Add to Basket

Model:
elt-mono
Brand:
elite-indus

pp fiber pp fibre polypropylene fiber Polypropylene Fibre pp fiber 6mm pp fibre 6mm Polypropylene Fibre 6mm Polypropylene Fiber 6mm pp fiber for mortar polyprropylene fiber for mortar

Products

Product Description

Monofilament Pp Polypropylene Fiber for Mortar Plaster Cracking Resistant

Descriptions

PP fiber 6mm use 100% virgin polypropylene granules as raw materials, produced by advanced technology for fiber spinning,

After Mix it into cement concrete or mortar, it has many advantages such as good dispersing, better water affinity, strong linking force, crack prevention, acid or alkali resistant.

PP fiber 6mm is suited for concrete reinforcement and crack prevention to cement concrete, dry mortar and plaster etc....

Pp fiber 6mm is a monofilament polypropylene microfiber use for concrete or mortar reinforcement, Quality complies with ASTM C1116 or EN14889-2 Standard.

The recommend dosage rate from 0.6kg/m3 to 3.0kg/m3.

Functions

Resist to shrink & crack	Improve tendons protection
Increase seepage resistance	Replace steel mesh (using in plastering)
Increase friction resistance	Prevent mortar split and crackle expansion
Increase freezing & thawing resistance	Increase impact resistance and peeling resistance

Advantages

Cost effective	Inhibits intrinsic cracking in concrete
Replaces anti crack mesh reinforcement	Disperses uniformly throughout the mix
Decreases construction time and labor	No rust, Explosive spall control

Typical Applications

◆ Suit for the waterproof layer, flooring, inner & outer wall of industrial and civil construction.

◆ Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.

◆ Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.

◆ Suit for any mortar projects and common concrete projects.

◆ Highway, bridge and other roads.

Applying Instruction

Dosage: for the common crack prevention, 0.9kg/m3 fibers to cement mortar Is good,

and for increasing reinforce and seepage resist application 1.8kg/m3 is good.

Stirring requirement : The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together, then stir after adding enough water, mixing time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely.

Specifications of pp fiber 6mm

Raw Material	100% virgin Polypropylene	Crack Elongation	20+/-5%
Fiber Type	Monofilament PPMF06	Fiber Diameter	25-30um
Melting Point (C Deg.)	160 - 170	Density (g/cm3)	0.91+/-0.01
Acid & Alkali Resistance	Strong	Tensile Strength (MPa)	450 min.
Length	6mm	Water absorbency	NO
Normal Length	4mm, 6mm, 8mm